混沌序列网形跳频网络同步方案

跳频信号的同步过程是跳频通信系统的关键.针对网形跳频网络中同步难的问题,提出了一种基于混沌序列的动态双频跳频同步方案.该方案采用混沌系统生成分布式跳频序列,同时引入并行解调器结构实现双频跳变的时序控制.仿真结果表明,方案可有效应对慢跳频通信系统中常见的部分频带干扰和强单频干扰,且同步建立过程简单迅速,系统的稳定性和安全...     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

玻璃瓶动态图像检测运动模拟平台

动态图像检测中,如何在指定位置快速而准确地捕捉到运动物体的图像是最基本的环节。试验验证图像检测装置的成像特性,成为动态图像检测研究的重要内容之一。以变频器控制电动机为核心,通过变频器内部参数编程和外部简单的辅助控制电路,构建了运动平稳、速度可调、具有自动保护功能的模拟平台。该平台适于动态图像检测中普通运动物体的快速模拟,已成功地用于玻璃瓶动态图像装置中,达到了预期目的。     

装备战场损伤的解析分析方法研究

为了提高装备战损模拟的效率,以蒙特卡洛方法为基础,构建了关于装备战损的解析模型。首先采用序贯法优化了仿真次数,以便以较少的仿真次数获得较高的仿真精度;分析了单因素对于装备损伤的影响,并建立了一元回归模型;采用正交试验分析了多因素之间的交互作用,并综合一元回归模型得出了装备战损的多元回归模型;最后结合弹着点分布模型与多元回归模型,建立了装备战损的解析模型,并通过实例验证了解析模型的正确性。     

非局部弹性杆固有频率的Ritz法求解

采用Ritz法求解了非局部弹性直杆的固有频率问题。非局部弹性理论与经典弹性理论相对应,区别在于非局部理论中,一点的应力与该点以及其周围区域的应变都有关,并采用核函数来表征这种相关性。基于Eringen提出的非局部弹性模型,针对三种给定核函数,用Ritz法进行了直杆的动力学分析。并针对两种边界条件给出直杆的固有频率,与其它方法比较,该方法具有可以针对多种核函数求解,精度可控,易于编程等优点。     

低频UWBSAR辐射校准模型

低频超宽带合成孔径雷达(Ultra Wide Band Synthetic Aperture Radar,UWBSAR)的辐射校准是系统研制和应用过程中必须面对的课题。低频UWBSAR的特点使得常规SAR辐射校准技术不再适用。充分考虑校准参数随频率和方位角的变化,给出适合该系统的辐射校准方法,得到低频UWBSAR图像辐射校准模型。利用该模型,对系统辐射校准误差进行了分析。     

差分跳频码性能检验研究

差分跳频是一种新的扩展频谱通信技术.在介绍差分跳频基本原理的基础上,将差分跳频的频率跳变过程建模成齐次马尔可夫链.分析了G函数的功能,重点讨论了差分跳频码性能的检验方法,包括不可约性、频隙滞留、均匀性和随机性检验,其中频隙滞留是首次提出应用于差分跳频码性能的检验.这些检验方法对于差分跳频G函数的设计具有一定的指导意义.     

ARMED NON-STATE ACTORS IN AFRICA AND THE BAN ON ANTI-PERSONNEL LANDMINES

A truly universal ban on anti-personnel mines cannot be realized without engagement of armed non-state actors and armed groups operating outside state control, including rebels and national liberation movements. Events after 9/11 have complicated engagement with organizations that can be classified as ‘terrorists’. Yet, the use of anti-personnel landmines itself can be viewed as an act of terrorism and African leaders have, on various occasions, classified the use of landmines and the presence of unexploded ordnance as engendering insecurity and a serious impediment to development. The success of a total ban ultimately depends upon ensuring that armed non-state actors act in accordance with international humanitarian law. The Geneva Call Deed of Commitment for Adherence to a Total Ban on Anti-Personnel Mines and for Cooperation in Mine Action (DoC) might be described as an alternative instrument to the Anti-Personnel Mine Ban Convention and can serve an important and impartial channel of communication with non-state actors. Already 18 armed groups in Africa have signed the Geneva Call DoC.     

基于北斗、短波的高精度时钟系统研究与设计

介绍了北斗、短波授时技术;对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于北斗卫星、短波无线电授时的高精度时钟系统;该系统通过利用北斗接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过延迟修正处理、脉冲滤波、脉冲补偿、脉冲统计得到标准的秒脉冲信号,实现对恒温晶振频率的校准,获得一个短期及长期频率稳定度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1pps信号对时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及部分模块电路图进行了说明,试验结果表明,在时间不长于1h内,频率准确度优于1×10-10;该系统实用方便的方法达到了将晶体振荡器校准到较高指标的目的。     

基于移动目标的DOA估计偏差校正

针对移动目标的波达方向估计容易出现偏差的问题,提出一种利用频移信息修正方位估计偏差的算法,解决了传统方位估计算法不能适用于高速移动目标或平台的问题。该方法利用基阵平台与目标的径向移动速度,估计中心频率偏移,然后利用频移信息修正传统的方位估计结果。仿真结果表明,该算法可以极大地提高移动目标的方位估计精度。此外,该算法对阵列的阵型和方位估计算法没有任何限制,因此具有广泛的适用性和较强的工程实用价值。